Mustee >

I chose this tub after reading reviews about the durability and finish of the sink/tub itself. I can say that I am very happy with my choice. the finish has a slight "gloss/gloss" feel to it which I think will be great for cleaning up after many of the painting projects I do. the sink is well made and relatively light to put in place. the legs are also sturdy, although they only snap into place (no screws). the sink holes were easy to drill with a 1" hole cutter and a 12v drill bit. the material while sturdy cuts very easily. light sanding around the holes removes a slight burr. i ended up having a nice koler faucet with the sink I would recommend getting a well made faucet with this as it seems like it will last a long time the koler faucet had a thread on the end to allow a garden hose to be plugged in from the faucet the aerator did not build as much "extra pressure" as a nice constant/predictable flow of water.

the quality is really good and it's sturdy. the bottom is marked for tap drilling, which makes it convenient, but you need to drill the holes.

the tub has a "crackline" consistent with a two-part manufacturing process - it's about 3 inches from the base of the tub all the way around. should have been ironed out - so most likely it's factory seconds. if the price is right and the perfect finish is not needed, the bath should be fine. I'll fill it with water and see if the bottom part comes apart!

this sink is very well built. fiberglass is much stronger and more studied than comparable plastic models. Assembly and installation are simple and straightforward. you'll need to drill holes to match your faucet of choice, but it's not that hard if you use a small hole saw and drill. all in all a great sink that lasts a long time.

I am very satisfied with the quality of this bath. it is much sturdier than the tub it replaced. attaching the legs was quick and easy. I appreciated the sturdy plastic height adjusters to attach to the bottom of each leg. they ensure a flat installation and do not affect the finish of the underlying floor. the holes are not pre-drilled in the back edge of the tub, which is a good thing as different types of faucets can be fitted. I especially liked the molded seamless drain that only requires you to attach a standard 1-1/2 inch flanged tailpiece and a slip joint nut. the fairing comes with the slip connection nut and a flange washer - remember to install the washer on (top/inside) the tailpiece to ensure a watertight installation.

this is a very nice sink. I replaced the 20 year old utilatub in my garage workshop with this upgraded version. it is very stiff and stable. the only disappointment I have is that there are imperfections in the finish that makes me think the seller is winding up the second quality through online. if I had bought this sink locally I would probably want a trade-in. I will say I'm surprised it wasn't damaged in shipping. there was no protection other than the outer packaging it came in. shippers are not friendly with large bulky boxes with loose items in them.